< BACK 1 of 1 NEXT >

Oceanic Spare Air 300 Package Oceanic Spare Air 300 Package Self contained, refillable, Spare Air is a total redundant back up miniature scuba system. In case of emergency, Spare Air provides air to safely get you back to the surface. Specifications: 48 litre, 200 bar offering approx 30 surface breaths. Includes deluxe h ... Read more :: Sat 03/29/2008 @ 12:14 RATING:   COMMENTS (0) Hydrotech O-Ring Hydrotech O-Ring Single standard O-ring. For cylinder o-ring size select metric for valves with M stamped on them, imperial for those with 3/4. Standard low pressure hoses require 3/8 o-ring, some high flow low pressure ports require 1/2 and high pressure hoses require 7/16. Read more :: Sat 03/29/2008 @ 12:14 RATING:   COMMENTS (0) Hydrotech O-Ring Hydrotech O-Ring Single standard O-ring. For cylinder o-ring size select metric for valves with M stamped on them, imperial for those with 3/4. Standard low pressure hoses require 3/8 o-ring, some high flow low pressure ports require 1/2 and high pressure hoses require 7/16. Read more :: Sat 03/29/2008 @ 12:14 RATING:   COMMENTS (0) Scubapro Tank Carry Handle Scubapro Tank Carry Handle Tank Carry Handle from Scubapro with soft feel grip, folds down neatly when diving to avoid entanglement ... Read more :: Sat 03/29/2008 @ 12:14 RATING:   COMMENTS (0) Scubapro Tank Carry Handle Scubapro Tank Carry Handle Tank Carry Handle from Scubapro with soft feel grip, folds down neatly when diving to avoid entanglement ... Read more :: Sat 03/29/2008 @ 12:14 RATING:   COMMENTS (0) Aqua Tec Nitrox Pony Sack Aqua Tec Nitrox Pony Sack For those that use Nitrox for decompression this pony sack clearly identifies the pony cylinder as containing Nitrox. Specification Made from 9oz nylon, the sack is designed to fit a 3 litre steel or 3 litre Luxfer aluminium pony cylinder with adjustable strap ... Read more :: Sat 03/29/2008 @ 12:14 RATING:   COMMENTS (0) Submerge Tank Seat Submerge Tank Seat A simple but handy way to stop cylinders rolling around in car boots or on boats. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Submerge Tank Banger Submerge Tank Banger A low cost but highly effective signalling device, goes round the cylinder and is "twanged" against the cylinder for attention. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Aqua Lung MDE International Adapter Insert Aqua Lung MDE International Adapter Insert The Aqua Lung MDE International Adapter Insert is a replacement core to convert MDE DIN200 convertible valves to A-Clamp. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Hydrotech Breathing Air Sticker Hydrotech Breathing Air Sticker Mark your cylinder for use with breathing air with this waterproof sticker ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Twin Tank Lift Bar Custom Divers Twin Tank Lift Bar The cylinder lift bar is designed to comfortably lift twinned cylinders on both manifoldedand non-manifolded systems. Fitting the lift bar will prevent stress to the manifold itself and o-ring seats. For manifolded tank configurations the lift bar is positioned ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Faber 3l 300bar Cylinder Faber 3l 300bar Cylinder Faber 3L steel cylinder with MDE Modbasic valve. (4"/10cm diameter cylinder, 20"/51cm length to neck of cylinder) ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Luxfer 1,5l Argon cylinder Luxfer 1,5l Argon cylinder Comes with 25mm DIN convertible valve. Cylinder working pressure 200bar. Now supplied as a green coloured cylinder. Please note cylinders can only be sent to UK mainland addresses. Specification Diameter 111mm Length 295mm Empty weight ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Hydrotech Tank Boot Hydrotech Tank Boot Tank boot to fit round bottomed cylinders. Select diameter required.Guidance: 8 inch option for 15l, 12.2l dumpy cylinders, 7 inch for 12l tall (normal) and 10l cylinders, 5.5inch for 7l cylinders ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Scubapro Twin boot Scubapro Twin boot Scubapro Twin Boot to Fit 7" 10L/12L Cylinders ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Scubapro Tank Valve Protective Cap Scubapro Tank Valve Protective Cap Tank valve cover which includes o-ring holder and connector so cover is not lost whilst cylinder is not in use. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Apeks Pony Straps Apeks Pony Straps Two 1.5" polypropylene and elastic straps which can be fitted to cylinder straps, providing a secure means of attaching your pony bottle to primary or double cylinders. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Apeks DIN to A Clamp adapter Apeks DIN to A Clamp adapter Convert your DIN regulator fitting so you can accept International A Clamp cylinder valves ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Scubapro DIN Cap Scubapro DIN Cap Scubapro DIN Cap. Stop dirt getting into your cylinder's DIN valve by inserting with insert. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Hydrotech Tank Mesh Hydrotech Tank Mesh Protect your cylinder from knocks with heavy duty cylinder mesh. Fits 7 or 8 inch cylinders (i.e. Faber steel 10l, 12l and 15l and Luxfer 10.4l and 12.4l). ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Dive Rite Stage Carry Strap Dive Rite Stage Carry Strap Quickly convert any cylinder to a stage or deco cylinder. The upper loop slips over the tank valve and has a D-ring to which you clip your regulator second stage. You can secure the bottom with either a cam band or stage clamp (supplied separately) ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers D Ring Stage band (single) Custom Divers D Ring Stage band (single) The stage band comes complete with clip and D ring. The band can fit cylinders up to 8" diameter. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Single Valve Protector Custom Divers Single Valve Protector Made from 316 Stainless steel, this protector is designed so it will allow the tanks to be inverted so that the full weight of the tanks can be rested on this protector ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Twin Bands (inc extended bolt kit) Custom Divers Twin Bands (inc extended bolt kit) The stainless steel bands are used to twin two tanks together. The bottom band of the set has two D rings attached, one either side. These two D rings give the diver additional points from which to mount equipment. All made from 316 stainless steel ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Pony Coupling Custom Divers Pony Coupling Used to mount a pony cylinder or a torch battery housing. The female half of the coupling has slots to enable the BCD belt to be threaded through. This remains on thejacket belt so that when removed it returns to the same position when refitted to the main tank. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Twin Valve Protector Custom Divers Twin Valve Protector Made from 316 Stainless steel, this protector is designed so it will allow the tanks to be inverted so that the full weight of the tanks can be rested on this protector ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Hydrotech Compressed Gas Sticker Hydrotech Compressed Gas Sticker Green warning sticker that should be displayed in all vehicles carry diving cylinders. Adhesive glue hold sticker to inside of rear screen. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Faber 3l 232bar Cylinder Faber 3l 232bar Cylinder Faber Steel 3l 232bar cylinder with valve DIN convertible valve. (4"/10cm inch diameter, 20"/50cm length to top of neck) ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Faber 12l 232bar Cylinder Faber 12l 232bar Cylinder Faber 12L steel cylinder with boot, Din convertible valve (will fit either DIN200 or International A-Clamp regulators) and handle. (7 inch version is tha standard "tall" version, whilst the 8 inch is considered the "dumpy" version more suitab ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Faber 15l 232bar Cylinder Faber 15l 232bar Cylinder Faber 15L steel cylinder with 232bar Din convertible valve, boot and handle. Please note cylinders can only be sent to UK mainland addresses. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Faber 10l 232bar Cylinder Faber 10l 232bar Cylinder Faber steel cylinder with boot, handle and DIN convertible valve. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Faber 12l 300bar Cylinder Faber 12l 300bar Cylinder Faber 12L steel cylinder with Din300 modbasic valve, boot and handle. Please note cylinders can only be sent to UK mainland addresses. Specification Height 70cm (top of valve) Weight 17.0kg (empty) ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Aqua Tec Pony Sack Aqua Tec Pony Sack The Aqua Tec Pony Sack is still the most popular way of carrying the reserve air. Sits snugly between jacket and main cylinder, easily transferable from one main cylinder to another. Specify 3 litre Steel or Aluminium (Luxfer) when ordering. Specifi ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Apeks Cylinder Pressure Tester Apeks Cylinder Pressure Tester This Apeks Cylinder Pressure tester is a 450bar High Pressure contents gauge that can be fitted to any cylinder to check the air pressure. With push button vent. Available with A-Clamp or DIN fitting. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Dive Pac Dive Pac The Dive Pac holder facilitates a safer and easier handling and transportation of the bottles (cylinders). You will immediately notice the safety and comfort in using the Holder:- No more rolling around of bottles in the car or boat damaging the bottles or causi ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Stage Band Clip 5mm Custom Divers Stage Band Clip 5mm Custom Divers 5mm Stage band clip ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers D Ring 5mm x 45mm Custom Divers D Ring 5mm x 45mm Custom Divers D Ring 5mm x 45mm ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers 45 Degree single D Ring Crossmount Custom Divers 45 Degree single D Ring Crossmount Custom Divers 45 degree single D ring crossmount ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers D-Ring Mount 90 Degree Custom Divers D-Ring Mount 90 Degree Custom Divers 90 degree mount ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) AP Valves 50mm Stainless Steel D Ring AP Valves 50mm Stainless Steel D Ring AP Valves 50mm Stainless steel D Ring ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Submerge O-Ring Holder Submerge O-Ring Holder O-Ring Holder from Submerge - Miniature tank with o-ring sealed screw off bottom for holding your spare o-rings, money etc. Fitted with key-ring. 20mm diameter, 55 mm high. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Custom Divers Rebreather Lift Bar Custom Divers Rebreather Lift Bar Custom Divers Rebreather lift bar ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Aqua Lung Carrying Handle Aqua Lung Carrying Handle Heavy duty cylinder handle to fit lightweight Faber cylinders. Please note to fit this handle the pillar valve must be removed from your cylinder and refitted by a trained technician. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Cetacea Valve Cap with String Cetacea Valve Cap with String Cetacea valve cap with string.Colours may vary ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Cetacea DIN Valve Plug Cetacea DIN Valve Plug Cetacea DIN valve plug ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Dive Rite Stabilizing Plates Dive Rite Stabilizing Plates Dive Rite stabilizing plates, set of two. Stainless steel suitable for mounting doubles. ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0) Metalsub Pony Quick Release Metalsub Pony Quick Release The Metalsub Pony Bottle Quick Release System allows the pony cylinder can be coupled to the main cylinder with the minimum for effort but with rigid stability. Half of the coupling is permanently mounted on the pony cylinder, while the other half is secur ... Read more :: Sat 03/29/2008 @ 12:15 RATING:   COMMENTS (0)

< BACK  1 of 1  NEXT >